Family Best Time >> Home & Garden

How to Make a Light Up Constellation Wall Art

Introduction

Let the zodiac signs light up your walls with this fun DIY project.

Step 1

How to Make a Light Up Constellation Wall Art How to Make a Light Up Constellation Wall Art

Miter cut and join to plywood

Cut to size 1x2 pine or birch, cut ends at 45 degree angles on miter saw. Once all the trim pieces are mitered, fasten them along the perimeter of the plywood with nails. The back of the plywood should be flush with the back of the trim. The front of the molding should be proud of the plywood, resulting in a lip around the front.

Step 2

How to Make a Light Up Constellation Wall Art

Apply the stain

Use a rag to apply an even coat of stain to the plywood and trim. Let it dry.

Step 3

How to Make a Light Up Constellation Wall Art How to Make a Light Up Constellation Wall Art

Paint star chart and add holes

Use a small detail brush and semi-gloss white paint to create the constellations. This can be freehand and random or it can be done literally in reference to an actual star chart.

Use a 1/4” drill bit to create the holes directly through the painted dots (stars).

Stage 4

How to Make a Light Up Constellation Wall Art

Seal with Polyurethane

Clean wood chips from the surface of the plywood, then use a paint roller to add an even coat of sealer.

Step 5

How to Make a Light Up Constellation Wall Art

Add twinkling lights

With the plywood turned inside out, push each of the twinkling lights through the drilled holes. Once all the holes have been filled, use electrical tape to fasten the ends of the twinkle light wires to the back of the plywood. Hang the constellation art on the wall, then plug in the lights.