Family Best Time >> Home & Garden

How to make firewood in a wooden barrel

Introduction

It seems that reproduction wooden boxes are all the rage now. But why settle for a fake attempt at a vintage wooden box when you can recycle and customize the real deal?

Step 1

How to make firewood in a wooden barrel

Dylan Eastman

Scour Salvage Shops and Antique Shops

When we were completing a new fireplace and hearth project, there was a real need for a fire starter to fit the design motif. So when we saw this little wooden barrel in our favorite old barn, its new purpose was immediately apparent. Personalizing an old box is incredibly easy. Whether it's a shallow tray set or a bookcase made from old fruit crates, you can add your own charm with burnt wood tags or a custom design.

Step 2

How to make firewood in a wooden barrel

Dylan Eastman

How to make firewood in a wooden barrel

Dylan Eastman

Size and print your design

Start by printing your design on regular printer paper. Then position the design in the perfect spot and slide a piece of carbon transfer paper under it. (Yeah, remember the carbon paper we all used before the digital age?) Glue it in place and trace the outer perimeter with a pen.

Step 3

How to make firewood in a wooden barrel

Dylan Eastman

Design trace

When you have traced the entire design, lift up one side and check that the transfer is complete. If not, you can put it back and continue on the light spots. When the outline is fully visible, remove the paper and tape.

Stage 4

How to make firewood in a wooden barrel

Dylan Eastman

How to make firewood in a wooden barrel

Dylan Eastman

Make the first line straight

Plug in a wood-burning griddle and let it heat up completely. Using a flat tip, first abrade the straight sections of the outline. Do not keep the iron in one place too long. Instead of using fluid strokes, you can darken the light areas again later.

Step 5

How to make firewood in a wooden barrel

Dylan Eastman

Complete the outline

Continue filling in the design. Be sure to do this in a well-ventilated area and away from any smoke detectors. Also make sure you have a secure surface to place the iron on when not in use.

Step 6

How to make firewood in a wooden barrel

Dylan Eastman

Even outside

Occasionally wipe the carbon off the tip with a damp cloth. As the carbon builds up, it actually acts as an insulator and decreases the effectiveness of the iron. Continue filling in any light areas. The wood should have a slight, even depression in the charred areas. Finally, clean up any rippling in the outline with the edge of the tip.