Like conventional inground and semi-buried pools, above ground pools also require maintenance, especially water, for a healthy bathing area, presenting no danger to the health of bathers.
Tubular, self-supporting, rigid or even inflatable pools... It is essential to take care of your above-ground pool, initially with a view to having healthy and clean water for swimming, but also to keep the equipment in good condition. The proof is that I have been using the same above-ground pool for three successive summer seasons now. I still intend to take full advantage of it this summer, but also the next few years.
How do I do ? Already, at the end of the period of good weather, I completely disassemble the pool. To do this, I completely drain the pool through its drain valve. It's very easy, just connect the garden hose and it's done by itself. Afterwards, I wash the liner with plenty of water to get rid of chlorine, grease and limescale residues. I let it air dry for a few days before storing it in a dry place.
Moreover, it is strongly recommended for tubular pool models. Because even if the canvas is made of reinforced PVC, its membrane remains fragile to cold and frost. On the other hand, dismantling is not mandatory for above-ground aluminum, steel or wood. However, do not forget to cover the pool with a winter cover to preserve the water. Note that an oil change is only necessary every two to three years.
As at the end of the summer holidays, I systematically dismantle my kit pool, I have fresh water every summer. However, this does not prevent me from maintaining it daily, especially since children also bathe in it. So, in the early evening, when the pool is unoccupied, I cover it with a protective canvas. This protects it from all kinds of debris and trash. And indeed, in the morning I regularly pick up tree branches, leaves, insects and once even a dead bird.
In addition, before diving into the pool, I carefully pick up all the dirt that floats on the surface of the water, using a landing net. Otherwise, I use a pool broom to rid the bottom of the pool of sand and small pebbles that come with the feet, the bodies of bathers or inflatable games. Otherwise, to make your life easier, you can use a robot vacuum cleaner. Some are automated and therefore fully autonomous.
The filter should also be cleaned regularly. I check at all times that the system is working. I particularly watch the cartridge. This part clogs very easily. And if the pool water starts to look cloudy, it's often a sign of poor filtration. Finally, for the health of pool users, the pH must be constantly monitored. And the ideal is a pH between 7.0 and 7.4 with a chlorine level not exceeding 1.5 mg per litre.
