Today I explain how to completely empty the water from the toilet bowl.
You may be wondering what is it for?
Imagine that it is very useful for easily descaling the bottom of the toilet bowl...
Or simply remove those ugly black marks from the bottom of the toilet.
It allows you to put homemade toilet gel to thoroughly clean the toilet.
Don't worry, it's very easy to empty the water at the bottom of the toilet bowl.
Just flush the water with the toilet brush. Watch:
1. Raise the toilet seat.
2. Take the toilet brush.
3. Put it in the bottom of the bowl.
4. Move the brush back and forth.
5. Start slow.
6. Then speed up.
7. Once the water is empty, apply your homemade toilet cleaning gel.
8. Leave on for 30 min or more.
9. Scrub with the toilet brush.
10. Flush.
There you go, you have easily emptied the water from the toilet and cleaned the bottom at the same time :-)
Easy, fast and efficient, right?
Just do this plunger motion for 2-3 min to empty the toilet bowl.
You see, it's not complicated to empty the water from the toilet siphon.
And it allows you to be able to descale the toilets thoroughly.
Indeed, the descaling product you put in is in direct contact with the bowl instead of being in the water.
Since it is more concentrated, it is therefore more effective and powerful in removing limescale.
No more yellow, brown or gray marks on the bottom of the toilet!
This trick makes it easy to whiten the bottom of the toilet with greater efficiency.
But be careful, it is better to wear household gloves.
Indeed, there may be splashes of water coming from the toilets when you operate the toilet brush.
And it's not very clean...
For this reason, it is better to start slowly before speeding up the movement.
After a few seconds there is already less water. Then you can be more vigorous.
This technique avoids having too many splashes everywhere.
The piston movement made with the brush allows the water to be expelled in the siphon.
It repels water in the pipes.
As you do not flush, the water is not replaced.
The bottom of the bowl is then empty.
You can then clean the bottom of the toilet.
So to clean the toilets with baking soda and vinegar, DIY toilet gel...
Or to remove black marks with citric acid, the result is better.
And it also works for wall-hung toilets.
Don't have a toilet brush? Or don't you want to do it this way?
No problem ! There is a second trick to empty the water from the bowl effortlessly.
You must first turn off the water supply to the toilet tank.
Usually the small tap is on the side of the tank.
Then flush the toilet. The water will leave.
But it will not be replaced since the tank is empty.
As you have cut off the water, it cannot refill.
The toilet bowl is empty.
And you can clean and descale your toilets easily.
If there is still a little water at the bottom of the bowl, you can use a water vacuum to remove standing water.
