Shower door tracks are often a very dirty place.
It's true that we often tend to forget to clean them...
As a result, the dirt and super stubborn water stains get stuck in the rails!
Fortunately, here is a very effective trick to clean them easily.
And no need to resort to toxic products like bleach!
The only "product" you need is our good old white vinegar. Watch:
- white vinegar
- Paper towel (preferably recycled paper)
- 1 old toothbrush (for deep scrubbing)
- Cotton Swabs (to reach difficult areas)
- 1 spray bottle (for the final rinse)
1. Soak a few pieces of Sopalin in white vinegar.
2. Spread the Sopalin soaked in vinegar along the entire length of the shower rails.
3. Leave the white vinegar to act for 30 min.
4. Scrub the rail with an old toothbrush. And there, magic! The dirt will disappear before your eyes.
5. For hard-to-reach areas, use Cotton Swabs.
6. Finally, using the spray bottle, spray the rails with water to rinse the vinegar from the rails.
There you go, your shower rails are now perfectly clean as on the 1st day :-)
It shines in the bathroom and all that effortlessly!
And you don't even need to use bleach. So no risk to your health or the environment.
If the smell of vinegar is unpleasant, turn on the CMV in your bathroom.
Otherwise, use this trick to neutralize the smell of white vinegar.
Are your shower doors sliding?
If so, they have deeper metal tracks than hinged doors.
As a result, spreading Sopalin soaked in vinegar is more difficult…
To remedy this, the trick is to first place the dry Sopalin in the grooves of the rails, then pour the vinegar over it.
