Family Best Time >> Home & Garden

Do-it-yourself bamboo fence, the required tools

Do-it-yourself bamboo fence, the required tools

What material to use for a do-it-yourself fence ? Bamboo is a good choice. In addition to offering a natural and zen side to your space or garden, it is ecological. It is also strong and wind resistant if you install it correctly. Finally, its manufacture does not require specific and complicated tools. Discover it all!

What tools are required to make a bamboo fence yourself?

You need a minimum of equipment to be able to install a bamboo fence. You can easily find them in tool stores:

  • A drill or bolter;
  • A jigsaw .

You will also need the following supplies:

  • Bamboo canes, the number of which will depend on the perimeter of the space to be fenced;
  • Nut bolts, screws or raffia;
  • Timber for the posts;
  • Planks for the frame.

For other useful and practical advice on this type of work, you can also go through sites like https://www.salon-maison-bois.com/.

Do-it-yourself bamboo fence, the required tools

How to make a bamboo fence?

Here are the steps to build a do-it-yourself bamboo fence.

Cutting bamboo canes

First, cut out the bamboo canes. They should not be too long (around 1 to 1.5 m) in order to be able to withstand strong winds. Then, cut each of them along the length so as to obtain sticks. For this step, it is advisable to use a jigsaw to be faster and more precise. Finally, remember to treat the materials against insects to guarantee the durability of the fence.

Installation of posts

Start by making holes about 50cm deep every 1.5-2m along the perimeter to be fenced. Then, firmly install the wooden posts, the dimensions of which depend on the height of the barrier you want to create. Here again, we must not forget to treat the wood to protect it against insects and corrosion.

Installation of the wooden frame

To create the frame that will be used to support the do-it-yourself fence, you will need boards only a few centimeters wide. As for the length, it will mainly depend on the distance between the posts installed previously. Then fix them horizontally on the ends of the stakes (top and bottom) to create the frames. Make sure that the distance between each board, from top to bottom, is shorter than the length of the rods. You can also install other boards in the middle if you want to create a very high fence.

Installation of bamboo sticks

Once the frames are properly installed, all you have to do is place the bamboo sticks vertically . To do this, it will be necessary to screw them to the supports, hence the usefulness of the drill and the screws. You can also use a wrench to be faster. The most passionate even use raffia to firmly tie the elements together. As for the distance between the bamboos, it depends on your preferences.

Do-it-yourself bamboo fence, the required tools

Finish

For the finish of your do-it-yourself fence, you just have to bring any sticks of bamboo that stick out to the same height. It is also possible to create original styles such as stepped or zigzag ends . You can even skip this last step for a more natural effect.

What precautions should be taken before making a do-it-yourself fence?

As mentioned above, it is essential to treat wood and bamboo against insects which can affect their durability. Also, measure the perimeter to be fenced before setting off so that you can accurately calculate the distance between the stakes, for example. It will also give you a clearer idea of ​​how many bamboo poles, planks and canes to use. Finally, handle the tools with care so as not to injure yourself.

Making a do-it-yourself bamboo fence is relatively simple, but sometimes time-consuming. In addition, the tools required, in particular the jigsaw and the drill are easy to find. Note that you can arrange the bamboo sticks horizontally. It is also possible to use cane rolls directly to have less work to do.