Family Best Time >> Home & Garden

Do-It-Yourself:The Ingenious Trick To Facilitate Reassembly of a Device.

Do-It-Yourself:The Ingenious Trick To Facilitate Reassembly of a Device.

Do you usually take apart devices to repair them?

Then you know that reassembling a device that has been disassembled can be complicated.

Especially when you are not organized! This is true for both electronics and household appliances.

Fortunately, here is a trick to make reassembling any device easier.

Use the sticky back of the Post-It notes to put the screws on during the disassembly of the device and indicate on the bottom of the paper their respective locations.

Do-It-Yourself:The Ingenious Trick To Facilitate Reassembly of a Device.

Contents
  • How to
  • Result
  • 2 other solutions
  • Your turn...

How to

1. Lay Post-Its upside down on the table.

2. As you disassemble the device, stick the screws on the sticky part of the Post-It.

3. Write on the bottom of the Post-It where they need to be put up.

Result

There you go, you have reassembled the device without worry :-)

Simple, practical and effective!

Very useful if you dismantle a computer, TV, radio or microwave, for example.

2 other solutions

- Take a photo of the inside of a complicated device then print the photo on a whole page and stick the different elements on it.

- Take a sheet of paper and draw a rough sketch of the disassembled device then drive the screws through the paper to find out exactly where they go.

I take this opportunity to thank all the handymen who repair everyday devices! It increases the life of the devices and reduces waste :-)

Your turn...

Have you tried this trick to reassemble a device? Let us know in the comments if it worked for you. We can't wait to read you!