With the déconfinement, we can finally go out as we want!
The problem is that it is still mandatory to wear a mask...
And this, in public transport, in supermarkets, at work, etc.
Why wear a mask? Because it allows you to protect yourself and others.
Fortunately, here are 5 quick and easy tutorials to make your no-sew protective mask ! Watch:
Contents
- a bandana
- 2 large rubber bands
- 1 paper towel
1. Lay the bandana flat on the table.
2. Fold it in half, then in half again.
3. Position the two rubber bands so that the bandana is divided into three equal parts.
4. Fold the right side of the bandana towards the middle.
5. Open it and place the left side in.
6. Pull each rubber band on each side.
7. Add a sheet of Sopalin inside the mask (change each time you use it).
8. Place the mask on your face by hooking the rubber bands behind your ears.
Discover the trick here.
- a piece of cloth
- 1 pair of scissors
- thread and a needle
- 2 rubber bands
- 1 iron
- 1 small metal rod
- 1 plate
1. Turn the plate upside down and lay it on the fabric.
2. Trace the shape of the plate with a marker on the fabric.
3. Cut along the line to get a circle.
4. Fold your round in half to get a semicircle.
5. Fold your half circle in half again.
6. With the scissors, cut each fold to obtain four triangles with a rounded base.
7. Take two triangles and overlap them.
8. Thread the yarn onto a needle and sew the rounded edges together. At the end, cut the thread.
9. Do the same with the other pair of triangles. You get two small "hats".
10. Flip one over to have the fabric designs facing you.
11. Take the other pair and layer it over the first to double your mask.
12. Adjust them well and sew the edges together. Attention, do not sew all the way to the end yet:leave 1/2 cm unsewn.
13. Turn your mask inside out, like a sock, pulling the fabric through the unsewn space.
14. Smooth it out so your mask has a nice shape.
15. Adjust the tips and iron them over.
16. Fold the ends inside the mask to make a small crease.
17. Sew this fold, leaving a space to pass the elastic. Do the same on the other side.
18. Cut the elastic in half and pass it through the fold using a small metal rod. Do the same on the other side.
19. Tie a knot at the end of the rubber bands and slide it inside the fold.
Discover the trick here.
- 1 clean thick sock
- 1 pair of scissors
- 1 paper towel or 1 handkerchief
1. Cut each end of the sock to make a rectangle suitable for the size of your head.
2. Lay the sock flat.
3. Make a cut on each side one cm from the edge.
4. Cut about half the width of the sock.
5. Flatten the sock so that the cuts face you.
6. Now take the paper towel and fold it.
7. Insert it into the sock.
8. Pass the ties behind the ears to put on your mask.
Discover the trick here.
- 1 paper towel
- 2 rubber bands
- 1 stapler
1. Wash your hands thoroughly with this washing technique.
2. Then completely unfold the paper towel.
3. Fold the entire napkin lengthwise like an accordion.
4. Put a rubber band at each end.
5 . Fold the two ends of the napkin over and staple them.
Discover the trick here.
1. Lay a sock flat on the table.
2. Fold the heel over the sock.
3. Cut off the end of the sock that sticks out.
4. Keep the part with the heel and unfold it.
5. Cut the side opposite the heel (the smaller, non-rounded side). If you open the sock:the heel forms a small bump.
6. Fold the sock in half. The heel is in your left hand.
7. 1/2 cm from the right edge of the sock, make a cut. Above all, do not cut all the way up.
8. Cut two sheets from a roll of toilet paper
9. Fold the sheets in 4.
10. Put them in the hollow formed by the heel of the sock.
11. Put your mask on your mouth, adjust it and hang it on your ears thanks to the notches.
Discover the trick here.