We are not talking about stairs in the singular, but about stairs in the plural. They can indeed adopt several forms, to really correspond to the needs. Today, presentation of the half-turn staircase.
When we talk about a winding staircase, we are talking about a staircase presenting, after a flight of steps, one or more angles. Unlike the straight staircase, a staircase with one or more turns is preferred when you want to optimize each square meter and therefore hope to take advantage of the one located at the corners, for example.
The under-stair trim, depending on the model that will be chosen, is effective for storing an unsightly vacuum cleaner. Other more imposing staircases even offer the possibility of making a small bathroom.
The half-turn (or half-turn) staircase incorporates a landing, with two flights of stairs parallel to each other. The steps, at the level of the central stringer, in the bend, can be narrower. We then speak of radiant steps, otherwise, we use the term balanced steps.
When a straight staircase is not possible, for safety reasons for example, the half-turn staircase can be an interesting alternative. To find out, it is essential to seek the advice of a staircase designer so that he can make a tailor-made staircase.
The half-turn staircase, even if other models can be put in the house, is often chosen for its assertive aesthetics.
As said above, the turning staircases, whatever they are, are appreciated for their small size in a room that they can however magnify, especially when the choice of materials and the tailor-made realization have been the object of professionals.
If we first think of wood, when we think of stairs, they can skilfully combine several materials. But the trend, to avoid the regular maintenance due to wood, is for metal stairs, especially when they are worked. Again, there are several possible materials, which leaves an interesting choice, depending on the requirements. They therefore respond perfectly to the desires of owners, in new homes, but also in the renovation of old properties.
In either case, a craftsman will want to go to the place where the half-turn staircase will be installed to carry out the various measurements, in particular that of the hopper, the height under the ceiling, in order to be able to meet the relative standards. to the construction of a staircase.
Depending on the configuration of the premises and what the owners expect, the craftsman can study the possibility of a more or less large landing. When this is the case, it can lend to charming decorations both classic and contemporary that will become the focal point of the dwelling and a source of pride for the owners.
You can also want this landing because it is located below a window overlooking the outside, to take advantage of the view and the natural light that will flood the place, without obstacles.
