Are your bathtub joints full of mold?
It often happens because of standing water after a bath on the bathtub or a shower.
And once the mold appears, it spreads to all the joints in the bathroom...
And there is no point in rubbing with a sponge.
It does not remove the mold and in addition, you risk damaging the seals.
Then you are certainly asking yourself the question...
How to remove traces of mold from tile joints?
Fortunately, there is a simple trick to remove mold from bathtub joints.
The trick is to use bleach and cotton. Watch:
1. Get cotton spool here.
2. Place a basin in the tub.
3. Pour a little bleach into the basin.
4. Cut a piece of cotton.
5. Put on cleaning gloves and dip the cotton in the bleach.
6. Place the cotton over the moldy joint.
7. Press the cotton so that it is in good contact with the seal.
8. Repeat the operation where necessary.
9. Leave on overnight.
And There you go ! Incredible but true, your bathtub seals are all clean :-)
You don't even need to redo the silicone seals!
It saves you having to change the seal of a bathtub.
This treatment is incredibly effective in cleaning the mold embedded in the joints.
No more traces of mold or black spots on the seals!
Now you know how to remove mold from silicone joints.
No need for anti-mold product for the bathroom seal.
It's much more economical that way.
With this anti-mold recipe for the bathroom, you'll have peace of mind for a few months now.
Know that this trick also works for the shower or any other tile joint.
And be aware that bleach is also super effective in removing mold from the walls or ceiling.
Are you looking for a natural trick to remove mold from tile joints?
Removing bathroom mold naturally can be really difficult.
The problem is that white vinegar isn't always effective at removing mold from joints.
Especially since sometimes mold has become encrusted behind the joints!
To remove mold from bathroom joints, bleach is really the most effective.
Why is the gasket blackened? It's because of a mold-causing fungus.
Especially when the water is stagnant on the edge of the bathtub!
So how do you clean tile joints that blacken ?
All that's left is the bleach to whiten your joints...
Bleach literally eliminates this fungus. The seals become all white, as if they were new.
The result is guaranteed!
Have you tried this economical trick to eliminate mold on the joints? Let us know in the comments if it worked for you. We can't wait to read you!
